Rod Bending Machines

High-precision bending of 10mm 304 stainless rods into U carry handles on a pin-jig table - each handle formed against hard stops and checked on the drawing.

CNC bending of 10mm cold-drawn steel rods into square U-frames and handles. Heavy-duty rod bender with coolant lines and repeatable multi-plane cycles.

High-precision 3D CNC bending of 10mm Q235 and A3 cold-drawn round rod into U-shaped automotive support parts.

High-precision automatic CNC bending of 10mm Q235 bright cold-drawn steel rods into long crank levers - Dongguan shop, bins of matched parts.

High-precision CNC bending of 12mm Q235 solid iron rods into heavy J-hooks - multi-view drawing checked, hooks formed with tight radius.

A rotary bending machine forms 12mm solid aluminum knurled rod into clean U-lever parts - straight stock in, flawless surface bends out at one station.

A rotary wrap die bends 12 mm solid stainless round rod into 90-degree L-elbow handles, red clamp blocks indexing each rod so every leg and radius matches.

High-precision CNC bending of 1.5mm stainless steel rod into long cranked display rods, verified with calipers and drawings. Fine rod forming machine.

High-precision bending of 16mm 304 stainless rods into heavy C carry handles on a CNC jig - thick bright bar formed into industrial grips.

High-precision bending of 16mm solid Q235 iron rods into wide U bars on a large CNC table - heavy section, generous radius, Humen shop.

High-precision CNC bending of 16mm solid T2 copper rods into crank hooks - two prototype pieces for a customer, formed without kinks or flattening.

High-precision CNC bending of 201 stainless rods into long S hanger hooks for electrostatic powder coating - strong coated rack hooks by the bin.

A benchtop rotary bender forms 20 mm solid iron round bar into U handles without surface marks - heavy bars in, clean bent pulls out, batch after batch.

High-precision 3D CNC bending of 2.5mm 304 stainless rods into rectangular wire frames with return legs - fine parts bent crisp and flat.

High-precision CNC bending of 2mm SUS304 stainless rods into small Z hooks - a 30-piece custom order done in one setup, proof that small batches run production machines.

High-precision CNC 3D bending of 304 stainless steel and iron solid round bars into hooks, rails and support rods. Single-piece custom orders welcome.

CNC bending of 304 stainless steel rod into double-crank hook parts, single pieces and batches. Chuck-style clamping with tray and bin collection.

High-precision 3D CNC bending of 6mm 316L stainless rods into double crank hooks - maximum corrosion resistance for marine and chemical service.

Automatic CNC bending of 3.5mm 201 stainless rod into protection bar pins - small parts produced by the bin.

High-precision CNC bending of 3.5mm 201 stainless rods into rectangular U pins - automated cycles with air-blow ejection filling bins fast.

A fast gallery of finished 3D CNC bent parts - hooks, U bars, cranks and rings in Q235 steel, 304 stainless, copper and aluminum from Gonger shop.

3D high-precision CNC bending of steel rod into Z-crank handle bars, 220 mm long, verified against drawings. Automatic rod forming for machine handles.

In-house developed 3D CNC rod bending machine forms 10mm solid steel car headrest rods in one cycle. Stable performance, strong capacity, high cost-efficiency.

3D fully automatic CNC bending of solid stainless rod into small hooks and L-parts, collected by the binload. High-precision wire and rod forming machine.

3D fully automatic CNC bending machine producing mixed batches of rod and wire hardware with high precision. Automatic cycle, bin collection, low labor cost.

High-precision CNC bending of 3mm 201 stainless wire into dishwasher rack and shelf wires - coil-fed Z profiles produced into green bins.

High-precision CNC bending of 4mm 201 stainless rods into L hanging hooks with return tips - small batch hardware produced clean and fast.

High-precision CNC bending of 4mm SUS304 stainless rods into rectangular U pins - fast cycles laying out rows of identical parts.

High-precision CNC bending of 4mm Q235 iron rod into small arc hooks - round-top hanging hooks produced fast, ready for plating.

High-precision CNC bending of 4mm stainless steel rod into square cleaning and washing basket frames. Automatic cycles with bin collection of matched frames.

CNC bending of 4mm stainless steel wire into long double-leg U-hooks with square tops. Coil-fed automatic forming for hangers, racks and fixture hooks.

CNC wire and rod bending machine producing 4000 identical 4mm steel clips per batch. Repeatable angle bending for stainless steel, carbon steel and aluminum parts.

CNC wire forming of 5mm 201 stainless steel rods into angled tie rods and handles. Finished parts verified against dimensioned drawings for repeatable accuracy.

High-precision CNC bending of 5mm SUS304 stainless rods into rectangular carry handles with folded feet - drawing verified, bright finish kept.

High-precision CNC bending of 5mm 304 stainless rods into S hanging hooks - double-curve hooks produced fast for jobsite and retail racks.

High-precision 3D CNC bending of 5mm chrome-plated rods into long U-pins, keeping the mirror finish intact. Rod, iron and stainless bending on one machine.

Fully automatic CNC bending of 5mm Q235 iron rod into long double-S spray hanger hooks - coated-service hangers produced by the sack.

High-precision 3D CNC bending of 5mm Q235 iron rods into multi-bend control levers - drawing checked, bins filling, batches banded and ready.

CNC bending of 5mm stainless steel rod into large square cleaning basket frames. Big-table rod bender producing flat, square, repeatable frames.

Solid 5mm stainless steel rods bent into rectangular case handle frames that fit molded plastic parts. CNC 3D rod bending with assembly fitment proof.

Stainless steel rod and strip forming: automatic wire forming machine plus manual protractor jig producing square handles and hooks in batch for hardware.

High-precision automatic CNC bending of 6063 aluminum rods into coffee grinder crank handles - small light parts produced by the hundreds per hour.

High-precision CNC bending of 6mm 201 stainless rods into long S hanging hooks, finished with electrostatic powder coating - rack hardware by the binload.

High-precision CNC bending of customer-supplied 6mm 303 stainless turned rods into crank links - each lever bent then caliper verified at the station.

High-precision CNC bending of 6mm 304 stainless rod into manual coffee grinder rocker cranks - smooth multi-bend grip profile.

High-precision automatic CNC bending of 6mm 304 stainless rods into open rectangular handles with return tips - bins of bright grip hardware.

High-precision CNC bending of 6mm SUS304 stainless rods into long crank handle bars for kitchen presses - bins of bright cooking hardware.

High-precision CNC bending of 6mm 304 stainless rod into U-shaped parts - parallel legs and clean inside radius.

High-precision fully automatic bending of 6mm 304 stainless wire into Z crimp pins - coil feed, servo lengths, bins of identical parts shipped to Guangxi.

High-precision fully automatic CNC bending of 6mm 304 stainless rods into long Z crank rods - unattended cycles filling bins in Dongguan Humen.

High-precision 3D CNC bending of 6mm iron rods into compact double-offset crank pins - small heavy parts formed in one clamping.

CNC rod bending machine forming hooks and brackets from 6mm iron rods. Automatic cycle with batch collection bin for hangers, fixtures and hardware parts.

CNC automatic bending of 6mm stainless steel rods into U-frames with an automatic bagging station - parts drop straight into packing bags, batch ready.

Watch a small benchtop rotary machine bend 6mm stainless steel round rod into U-clips and square rings - fast cycles, caliper-checked, consistent geometry.

High-precision CNC bending of 6mm steel rods into small U and staple parts, verified with a dial gauge. Single pieces and batch orders with measured proof.

CNC 3D bending of 7mm cold-drawn steel rods into rectangular open rings and frames. Heavy rod forming with drawing verification for hardware batches.

7mm solid iron rods bent into children's bicycle stabilizer stand frames, verified on full-size drawings. Custom rod bending for bike and toy hardware.

High-precision CNC bending of 8mm 304 and 303 stainless rods into open C carry handles - fast cycles dropping finished handles into bins.

High-precision bending of 8mm 304 stainless rods into square-corner U-bolts on a CNC jig table - blanks staged, legs dead parallel.

High-precision CNC bending of 8mm 304 stainless rods into long threaded U parts, then trial-assembled with customer fittings to prove mounting dimensions.

High-precision bending of 8mm 304 stainless U hooks - rod blanks cut to length, then round-U swept on the CNC disc, boxed and shipped.

High-precision 3D CNC bending of 8mm 35CrMoV alloy steel rods into crank hooks - springback-true heavy parts for demanding hardware.

High-precision CNC bending of 8mm Q235 bright rods into gentle arc lock and support bars - clipboard drawing at the station, rows of matched parts.

CNC bending of 8mm cold-drawn steel rods into automotive loop frames. Multi-plane parts formed in one cycle with consistent angles for auto production.

High-precision CNC bending of 8mm Q235 bright cold-drawn steel rod into 7-type hooks - clean hook tips and straight shanks.

High-precision CNC bending of 8mm SPCC iron rod into skeleton-style L parts - long legs, tight angle and bin output.

A rotary bending machine forms 8 mm stainless steel round rod into U parts with ball ends - clean tight bends, matching leg lengths and fast manual cycles.

CNC bending of 8mm stainless steel rods into seat lift levers with a triangular loop handle. Clean radii, repeatable geometry for furniture and machine hardware.

Fully automatic CNC bending of 8mm stainless steel rods into handles and frames. Mirror-finish parts with clean radii for appliances, furniture and fixtures.

Watch an 8mm stainless steel threaded rod bent to 90 degrees on a rotary bending machine - clean L-elbows with intact threads, checked against a shop print.

Watch a rotary die bending machine form 9 mm solid stainless steel round bar into threaded-end handle parts in one quick stroke - fast, repeatable rod bending.

A benchtop rotary bender forms 9 mm solid stainless round rod into U and L handle shapes - straight rods in, clean bent pulls out, batch after batch.

High-precision CNC bending of aluminum rods into long kitchen pot-lid hanging hooks - light, corrosion-free rack hardware checked against the drawing.

Solid rod bent into S-hooks and arc-end hooks on custom die stations. CNC and jig bending for hangers, luggage hardware and bag hooks with rounded tips.

High-precision CNC bending of 6mm solid stainless rods into appliance handles. Automatic cycles with bin collection. Affordable price and fast delivery.

A rotary 3D wire bending machine forms small hook parts at full speed and drops them straight into a bin - continuous automatic output with no operator tending.

CNC bending of Q235 and SPCC rod into automotive hooks, buckles, battery bracket supports and hangers.

High-precision 3D CNC bending of 6mm iron rods into automotive lock buckle U hooks - EV and car hardware produced steadily into bins.

Watch an 8 mm automotive steel wire bending machine form wide V-shaped wire parts with hook ends in one automatic cycle on a CNC rotary 3D wire bender.

See a CNC 3D wire bending machine form 7 mm automotive wire frame parts with hook ends in one automatic cycle - strong rod bending for vehicle components.

Watch a benchtop rotary bending machine form 90-degree elbows in 12 mm solid stainless rod - caliper-checked leg lengths and clean, mark-free bends.

High-precision 3D CNC bending of stainless crank links followed by drilling at the ends - bend, drill, thread and weld combined in one workshop.

Precision bent parts produced on Gonger CNC machines: hooks, U-bolts, corner baskets, clips and frames checked against drawings. Prototype singles to batches.

High-precision CNC bending of 5mm Q235 iron rods into smooth reinforcement arcs for bicycle and e-bike handlebars - gentle radius, no flat spots.

Watch a hydraulic markless bending machine fold brass flat bar into double S-hooks - clean bends with polished radius and no surface marks, part after part.

CNC bending of brass rod into small Y-clips and retainers, single pieces to batches. Precision rod forming for decorative and electrical hardware.

Watch a cam-driven CNC wire forming machine coil and shape spring wire at multiple stations - precise compression springs made automatically.

Watch a camless 3D wire bending machine form 5 mm steel wire carry handles for storage boxes - servo blade axes shape thick wire with no cam discs.

Watch a CNC 3D wire bending machine form 6 mm steel wire into car seat backrest frames in one automatic cycle - clean 3D bends, hook ends, repeatable output.

High-precision CNC bending of Q235 bright steel rods into L crank pins - ends chamfered before bending, trays of matched cranks.

Watch our CNC 3D rod bending machine produce 3000 pieces of 2mm stainless steel clips in about 5 hours. Fast automatic cycle with gravity collection bin.

High-precision CNC bending of 6mm hexagonal stainless steel rods into crank and step shapes. Automatic bending cycles with batch bin collection for hardware.

High-precision CNC bending forms perforated steel mounting rail into square frames and brackets, keeping hole positions true after every bend.

Watch a CNC 2D wire bending machine form wavy flower-ring parts from steel wire on a rotary disc table - flat wire forming in one automatic cycle.

See a servo CNC 3D wire forming machine bend thin coated steel rod into precise L-shaped angle pins, with the finished parts checked right off the machine.

High-precision CNC bending of 304 stainless rods into coffee grinder rocker cranks - sample set formed with smooth multi-bend profiles.

High-precision CNC bending of 304 and 303 stainless coffee grinder crank rods - every handle dropped onto a machined gauge plate to prove the bend angles.

Coil wire is fed in, straightened and bent into double-crank steel pins in one pass on this 3D wire bending machine - a real construction-site part.

Inside Gonger's tooling shop: lathe-turned die cores, EDM wire cutting and assembly of custom bending dies for wire and rod forming jigs and machines.

A professional bending gallery: U-hooks, square frames, Y-rods, T-clips, U-bolts and threaded elbows bent from iron and stainless rod to customer drawings.

High-precision bending of aluminum lock buckle elbows for new energy vehicles - each part laid onto the customer drawing at the bench.

Watch a flat-table rotary 3D wire bending machine form zigzag hook racks from 2-6 mm iron wire in one automatic cycle - every loop identical with hook ends.

Fully automatic CNC bending of 10mm cold-drawn steel rods into rectangular U-frames. Heavy rod forming with servo feed and bin collection for hardware batches.

Fully automatic CNC bending of 5mm stainless steel rod into square handles. Coil straightening, multi-plane cycles and bin collection for hardware volume.

Low-cost hand-lever bending jig forming 8mm stainless steel rods into angled parts. The budget-friendly way to prototype and run small batches without a CNC.

A production line of high-precision CNC bending machines forming Z-crank iron rods for supports and linkages, with bins of finished parts at each station.

A parts gallery from the 3D CNC bending shop - S hooks, beaded rods, rectangular handles, U bars, hex hooks and cranks in stainless, iron and plated steel.

Watch a hydraulic rotary bending machine form 12 mm stainless steel round bar into ball-end crank handles in one quick stroke - fast, repeatable rod bending.

See a hydraulic rotary bending machine form stainless threaded rods into 90-degree parts in one quick stroke, producing clean bends and matching parts in bulk.

See a hydraulic bending machine form slim round rod into large U-frames - both ends bent to identical geometry with simple manual feed and quick cycles.

Gonger's in-house developed 3D wire forming machine bends 8mm solid iron rods into double-crank hooks and brackets with repeatable accuracy for batch production.

Watch a CNC 3D wire bending machine straight-feed iron wire and form rectangular frame parts in one automatic cycle - consistent, batch-ready hardware parts.

Watch an automatic iron wire bending machine form hook-shaped wire parts in fast repeated cycles at a rotary 3D head - high output with consistent geometry.

High-precision CNC bending of long Q235 bright steel rods into large crank links - straightness held along the full length, offsets placed exactly.

High-precision bending of long stainless crank hooks on clamped jig tables in Dongguan - multi-bend hangers formed true and staged by the tray.

Manual lever bending machine forming 8mm stainless steel rods into U-handles. Low-cost bench tooling for workshops running single pieces and small batches.

8mm hexagonal steel rods, threaded and turned before bending, formed into elbow fittings without surface marks. Precision CNC bending for fastener hardware.

High-precision 3D CNC bending of Q235, 45 steel, 304 and 201 solid round bars into long hanging support parts.

High-precision 3D CNC bending of 8mm 304 stainless rods into fork support rods for custom PC builds - GPU braces bent to the exact frame geometry.

Gear-indexed pneumatic bending jig forming 10mm stainless steel rod into U-frames. Manual positioning with powered bending - fast setup for small batches.

High-precision pneumatic bending of 10mm stainless steel rods into U-handles, proving the 1mm-16mm capacity range of Gonger rod bending stations.

High-precision CNC bending of 304 stainless rods into long prototype carry handles - customer sample parts made on production machines, ready to fit-test.

Watch a 3D CNC wire bending machine form rectangular iron wire frames for shelf grids in one automatic cycle - flat rack parts, stack after stack.

Sample parts from the round bar bending line - arc hooks, threaded U-bolts, triangular frames and cranked levers formed to customer drawings.

High-precision bending of steel anchor tubes for seatbelt and EV hardware - S-crank geometry checked against drawing C00327905 at the bench.

Semi-automatic CNC bending of 6mm stainless steel rods with lathe-turned 4mm tips. Manual feed, fast cycle, ideal for handles and frames in small batches.

High-precision CNC bending for single-piece and small-batch non-standard parts - custom rod bending from drawings.

Watch a small hydraulic bending machine form copper round rods into L-shaped hardware parts - fast single-stroke bends, clean surface, consistent batch output.

Watch solid copper rod blanks bent into smooth elbow fittings on a compact bending machine - tight radius, no kinks, identical parts stacked per batch.

High-precision fully automatic CNC bending of 304 stainless rods into special wide crank handles - proof-fit onto demo boards before batch.

Bent stainless steel frames go to TIG welding at the jig bench - one-stop bending plus welding for brackets and supports, with finished welded frames shown.

A rotary bending machine forms 90-degree L parts from stainless round rod - one indexed stroke per elbow, neat rows of matching hardware parts at the station.

High-precision CNC bending of stainless steel rod into crank parts, verified on a go-no-go gauge plate. Single pieces and batches with dimensional proof.

See a rotary die bending machine form a closed eye ring on stainless steel round rod in one stroke - clean hook-eye bending for hardware and display parts.

Watch a benchtop rotary die bending machine form stainless steel round rod into S-hooks in one quick stroke - clean mark-free bends, repeatable hardware output.

Watch a rotary die bend stainless steel round rod into closed triangular rings in one setup - clean, even corners and matching rings produced batch after batch.

A benchtop rotary bender forms triangular wire frames from stainless round rod in three quick bends - repeatable geometry, straight rods in, finished parts out.

A rotary bending machine forms double-bend Z hooks from stainless rod - diameters checked with calipers, clean bends, matching parts pile up.

Watch stainless steel round bars with headed ends bent into 90-degree L-parts on a rotary machine - clean bends, print-checked dimensions, batch after batch.

Watch a 3D wire bending machine form triangular handles from 5 mm 304 stainless steel wire at a customer site - automatic feed, bend and cut-off.

Watch a CNC 3D wire bending machine form stainless steel wire into ring loop parts with straight tails - rotary die, touch-screen control, one automatic cycle.

Watch a CNC 3D wire bending machine form 5 mm stainless steel wire into zigzag and hook parts in one automatic cycle - heavy-gauge wire forming.

Watch a 3D wire bending machine form small solid steel pins, then see each finished pin checked with a dial caliper to confirm accurate diameters.

10mm iron rods threaded on the lathe then CNC bent into crank link rods, batch output verified on drawings. Machining and bending combined hardware.

A 3D wire bending machine coils and forms double torsion springs from straight steel wire in one cycle - coil bodies, bridge and legs all in a single run.

Custom bending of solid stainless steel rods with turned and threaded ends - pins and cranks formed on a CNC disc station with air-blow cooling.

10mm free-cutting iron rods with lathe-turned threads, drilled pin holes and precision bends - complete machined-and-bent hardware in one workflow.

Diameter 10mm T2 red copper rods bent into custom crank hooks on a precision hand die - two-piece prototype order formed round and true.

Watch a 2D/3D CNC wire bending machine form automotive steel wire clips in one automatic cycle - accurate angles, clean ends, repeatable output.

Watch a 3D wire bending machine form a long crank-shaped steel wire part in one cycle - rotary disc tooling, servo feed and clean multi-angle bends.

Close-up of a 3D wire bending machine forming kitchen storage rack parts from stainless and iron wire - rotary die, servo feed, automatic cycle.

An operator sets up feed guides, clamps and the forming disc on a CNC 3D wire bending machine with hand tools - simple tooling access means faster changeovers.

High-precision 3D CNC bending of steel rods into Z-crank handles, then a second forming step and trial assembly onto a carry case - fit proven before batch.