rod-bendingRequest a Quote
6mm Steel Rod High-Precision CNC Bending with Dial QC
High-precision CNC bending of 6mm steel rods into small U and staple parts, verified with a dial gauge. Single pieces and batch orders with measured proof.
Key Specifications
- Materials
- Steel rod, 6 mm diameter
Key Features
- Bends 6mm rods into tight small U-parts
- Dial gauge proves leg lengths on every setup
- Both ends formed in one clamping
- Parts small enough to check in hand
How Small Can a 6mm Rod Part Be and Still Hold Tolerance?
Short answer: As small as the demonstrated staples - when both ends bend in one clamp and a dial gauge checks the result. This video shows 6mm steel rods formed into tight U-parts with measured leg lengths.
What the Video Demonstrates
| Step | Operation | Result |
|---|---|---|
| 1 | Rod centered in clamp | Symmetric start |
| 2 | First end bent | Set leg |
| 3 | Second end bent | Matched leg |
| 4 | Dial gauge check | Measured pass |
Key Applications
- Support feet and bracket staples
- Retaining clips for panels
- Structural U-links in machinery
One-Clamp Two-End Bending
| Sequential clamping | One-clamp forming |
|---|---|
| Error stacks twice | Datum held once |
| Slower | Faster cycle |
| Legs drift | Legs match |
FAQ
Is the dial gauge reading recorded? For batch runs, first-article and periodic checks are logged with the order.
Can stainless run the same program? Yes - springback compensation adjusts the angles per material.
Interested in this machine?