Wire Bending & Fastener Forming

Fully automatic high-precision CNC bending of 1.5mm galvanized iron wire into small U hooks - tiny parts produced by the tens of thousands.

High-precision CNC bending of 1.5mm stainless steel rod into long cranked display rods, verified with calipers and drawings. Fine rod forming machine.

Bending fine 1.5mm stainless steel wire into luggage and bag clips. Precise small-radius forming on CNC and simple tooling for delicate hardware parts.

201 stainless steel wire bent fully automatically into long double-hook display frames. CNC wire forming with drawing verification and bin output.

High-precision 3D CNC bending of 2.5mm 304 stainless rods into rectangular wire frames with return legs - fine parts bent crisp and flat.

3D fully automatic CNC bending of 2.5mm steel wire into motor retaining clips. High-speed wire forming with bin collection for electric motor hardware.

High-precision bending of 2.5mm stainless steel wire into small square open loops. Automatic CNC forming with manual jig option for hardware batches.

Automatic CNC bending of 2mm galvanized iron wire into long loops and hangers. Coil feed, high-speed forming, bundled output for hardware production.

High-precision CNC coiling of 2mm stainless wire into perfect circles - five custom rings for a customer, formed and trimmed on the hoop machine.

High-precision CNC bending of 2mm SUS304 stainless rods into small Z hooks - a 30-piece custom order done in one setup, proof that small batches run production machines.

High-precision CNC bending of 3.5mm 201 stainless rods into rectangular U pins - automated cycles with air-blow ejection filling bins fast.

High-precision CNC bending of 3mm 201 stainless wire into dishwasher rack and shelf wires - coil-fed Z profiles produced into green bins.

High-precision CNC bending of 4mm SUS304 stainless rods into rectangular U pins - fast cycles laying out rows of identical parts.

High-precision fully automatic CNC bending of 4mm iron wire into Z and U clips for water pump hardware. Coil feed, fast cycles, bagged bulk output.

Automatic CNC bending of 4mm iron wire into pump clips in high volume. Coil feed, straightening and forming in one machine with bin collection of parts.

CNC bending of 4mm stainless steel wire into long double-leg U-hooks with square tops. Coil-fed automatic forming for hangers, racks and fixture hooks.

CNC wire bending machine forming full rings and hoops from 4mm stainless steel wire with coil feed. Clean round shapes with consistent diameter every cycle.

CNC wire and rod bending machine producing 4000 identical 4mm steel clips per batch. Repeatable angle bending for stainless steel, carbon steel and aluminum parts.

Fully automatic CNC bending of 5mm Q235 iron rod into long double-S spray hanger hooks - coated-service hangers produced by the sack.

Stainless steel rod and strip forming: automatic wire forming machine plus manual protractor jig producing square handles and hooks in batch for hardware.

High-precision fully automatic bending of 6mm 304 stainless wire into Z crimp pins - coil feed, servo lengths, bins of identical parts shipped to Guangxi.

High-precision fully automatic CNC bending of 6mm 304 stainless rods into long Z crank rods - unattended cycles filling bins in Dongguan Humen.

Precision bent parts produced on Gonger CNC machines: hooks, U-bolts, corner baskets, clips and frames checked against drawings. Prototype singles to batches.

Inside Gonger's tooling shop: lathe-turned die cores, EDM wire cutting and assembly of custom bending dies for wire and rod forming jigs and machines.

A professional bending gallery: U-hooks, square frames, Y-rods, T-clips, U-bolts and threaded elbows bent from iron and stainless rod to customer drawings.

Fully automatic CNC bending machine producing 3mm steel mask holder hooks with a digital part counter. Coil feed, bin output, custom orders welcome.

3,000 small hooks bent automatically from 1.8mm 65Mn manganese spring steel wire on a CNC wire bending machine. Coil feed, straightening and bin collection.

A parts gallery from the 3D CNC bending shop - S hooks, beaded rods, rectangular handles, U bars, hex hooks and cranks in stainless, iron and plated steel.

Automatic CNC bending of iron wire into luggage and bag buckles by the binload. Coil straightening, fast cycles and manual jig backup for hardware.

High-precision pneumatic bending of 10mm stainless steel rods into U-handles, proving the 1mm-16mm capacity range of Gonger rod bending stations.