wire-bendingRequest a Quote
4mm Iron Wire Clip Bending - High-Speed Automatic CNC
High-precision fully automatic CNC bending of 4mm iron wire into Z and U clips for water pump hardware. Coil feed, fast cycles, bagged bulk output.
Key Specifications
- Materials
- Iron wire, 4 mm diameter
- Speed
- High-cycle-rate production
Key Features
- Runs 4mm iron wire clips at production speed
- Coil reel feed with straightening
- Z and U geometries from one platform
- Bulk output bagged by the sackload
What Throughput Does an Automatic 4mm Wire Clip Machine Deliver?
Short answer: Sackloads. This video shows 4mm iron wire formed into Z and U clips on a fully automatic CNC bender - coil feed, high cycle rate, finished parts bulk-bagged.
What the Video Demonstrates
| Item | Result shown |
|---|---|
| Stock | 4 mm iron wire on coil |
| Parts | Z-clips and U-clips |
| Cycle | Fully automatic CNC |
| Packing | Bulk bags per order |
Key Applications
- Water pump retainers and clips
- Fence, rack and fixture hardware
- Any high-volume small wire form
Automatic Coil-Fed Bending vs Pre-Cut Bending
| Criterion | Coil-fed automatic | Pre-cut bar |
|---|---|---|
| Labor | Supervision | One operator per cycle |
| Rate | Hundreds/hour | Tens/hour |
| Length control | Servo measured | Saw cut |
| Best volume | 1,000+ pcs | Samples |
FAQ
Can the machine change clip styles between runs? Yes - program plus a short tooling swap covers other Z, U and hook geometries.
Do you supply the wire or only the machine? The machine page covers equipment; wire stock is sourced locally by most buyers.
Interested in this machine?