rod-bendingRequest a Quote
Manual Bending Machine for 8mm Stainless Steel Rod Parts
Manual lever bending machine forming 8mm stainless steel rods into U-handles. Low-cost bench tooling for workshops running single pieces and small batches.
Key Specifications
- Materials
- Stainless steel rod, 8 mm demonstrated
Key Features
- Bends 8mm solid stainless rod by hand lever
- Form disc and pin tooling sets the bend radius
- Pre-cut bars stacked ready at the station
- No electricity or air required at the bench
Do Small Workshops Need a CNC to Bend 8mm Stainless Rod?
Short answer: Not for small batches. This video shows a manual lever bending machine forming 8mm stainless steel rods into U-handles - hardened disc and pin tooling, body-weight leverage, no power required.
What the Video Demonstrates
| Element | Role | Result |
|---|---|---|
| Form disc + pins | Set radius and stop | Repeat bends |
| Long lever | Multiplies force | 8 mm rod by hand |
| Bar stack | Pre-cut stock at bench | Fast cycle |
| Finished U-handles | Output | Ready for assembly |
When a Manual Bending Machine Is the Right Buy
| Situation | Manual lever | CNC bender |
|---|---|---|
| One-off parts | Yes | Overkill |
| Under ~200 pcs | Yes | Optional |
| Tight angle tolerance | Gauge checked | Program locked |
| Budget | Lowest | Higher |
FAQ
Can the same machine bend mild steel and brass? Yes - disc and pin sizes change with material and diameter.
Do you upgrade paths from manual to CNC? Gonger supplies both; many shops start manual and add a CNC bender as volume grows.
Interested in this machine?