rod-bendingRequest a Quote
Stainless Bracket Bending and TIG Welding One-Stop Service
Bent stainless steel frames go to TIG welding at the jig bench - one-stop bending plus welding for brackets and supports, with finished welded frames shown.
Key Specifications
- Materials
- Stainless steel rod frames
- Speed
- 2x edited footage of full bench cycle
Key Features
- Bending and welding flow in one workshop
- Welding jig holds bent frames in true position
- TIG tack welds on stainless joints
- Locators match the bend geometry exactly
Why Buy Bending and Welding From One Supplier?
Short answer: Because bent parts must fit the weld jig. This video shows stainless frames moving from the CNC bender straight to the TIG bench - locators match the bend geometry, so welding is fast and parts stay true.
What the Video Demonstrates
| Step | Operation | Result |
|---|---|---|
| 1 | Bent frames staged | Ready for weld |
| 2 | Frames seated in jig | True position |
| 3 | TIG tack welding | Clean stainless joints |
| 4 | Layout check | Assembly-ready part |
Key Applications
- Equipment brackets and support frames
- Guards and racks needing welded corners
- Appliance and fixture assemblies
One-Shop Bending + Welding vs Two Suppliers
| Factor | Two suppliers | One shop |
|---|---|---|
| Tolerance disputes | Common | Single owner |
| Freight between steps | Yes | No |
| Lead time | Additive | Overlapped |
FAQ
Is the footage sped up? Yes - the clip runs at 2x to show the full bench cycle quickly.
Can you finish after welding? Grinding, passivation and plating are arranged downstream with partners.
Interested in this machine?