5mm Stainless Wire Bending Machine for Zigzag Parts
Watch a CNC 3D wire bending machine form 5 mm stainless steel wire into zigzag and hook parts in one automatic cycle - heavy-gauge wire forming.
Key Specifications
- Materials
- 5 mm stainless steel wire
Key Features
- Forms heavy 5 mm stainless wire into clean zigzag parts
- Rotary bending head creates multi-plane angles in one cycle
- Sized wire guide holds thick stock without deflection
- Straight feed - no pre-cut blanks to load
How Are Thick Zigzag Wire Parts Bent in One Automatic Cycle?
Short answer: On a CNC 3D wire bending machine. This video shows 5 mm stainless steel wire straight-fed into a rotary disc bending head that forms alternating zigzag bends and hook curves - every plane change happens in one automatic cycle, producing rigid heavy-gauge wire parts.
What the Video Demonstrates
| Stage | Equipment | Result |
|---|---|---|
| Feed | Straight feed through 5.0 mm wire guide | Thick wire held rigid at each bend |
| Form | Rotary disc 3D bending head | Alternating zigzag angles in sequence |
| Shape | Hook and curve tooling | Smooth bends without wire flattening |
| Output | Part lifted off at the disc | Identical zigzag parts per batch |
Key Applications
- Thick wire handles, hooks and support brackets
- Zigzag retainers and spring-seat forms
- Stainless parts for kitchen, medical and furniture hardware
- Batch work replacing slow hydraulic press bending
CNC 3D Bending vs Hydraulic Press Bending
| Criterion | Hydraulic press bending | CNC 3D wire bending |
|---|---|---|
| Multi-plane zigzags | Re-fixture per bend | One automatic cycle |
| Stainless spring-back | Operator compensation | Programmed angle values |
| Changeover | Die swap and trial parts | Load another program |
| Part consistency | Batch dependent | Repeatable geometry |
FAQ
What wire diameter does this machine handle in the video? 5 mm stainless steel wire, run through a matched 5.0 mm guide; other diameters use corresponding tooling.
Can it bend stainless without marking the surface? Yes - the rotary disc and polished tooling grip the wire around its profile, so thick stainless parts come off clean.
What part shapes are practical on this machine? Zigzags, hooks, cranks and flat 3D forms; the program and tooling are set up for your part before delivery.