3D Wire Bending Machine | Kitchen Rack Wire Parts
Close-up of a 3D wire bending machine forming kitchen storage rack parts from stainless and iron wire - rotary die, servo feed, automatic cycle.
Key Specifications
- Materials
- Stainless steel wire and iron wire
Key Features
- Bends multi-plane wire clips around a rotary die in one cycle
- Servo feed rail positions the wire precisely for each bend
- Rotary head indexes to bend in different directions
- Compact bolt-on tooling changes over quickly between parts
How Are Kitchen Rack Wire Parts Bent on a 3D Wire Bending Machine?
Short answer: With a rotary wrap-around die plus a servo feed rail. This factory video shows a 3D wire bending machine forming kitchen storage rack clips and hooks from stainless steel and iron wire - the wire is fed, clamped and bent around the indexing rotary disc in one automatic cycle.
What the Video Demonstrates
| Stage | Equipment | Result |
|---|---|---|
| Feed | Servo rail with linear guide | Wire stops at the exact bend position |
| Clamp | Pneumatic clamp block | Wire locked without surface damage |
| Form | Rotary wrap-around die disc | Clean bends in multiple planes |
| Cut-off | Fixed blade beside the die | Finished clip released per cycle |
Key Applications
- Kitchen storage racks, baskets and shelf supports
- Wire hooks, clips and brackets for hardware
- Stainless parts for kitchenware and sanitary fittings
- High-volume iron wire forms replacing hand-bent parts
3D Wire Bending Tooling Shown
| Component | Role in the cycle |
|---|---|
| Rotary die disc | Wraps the wire around pins to set each angle |
| Servo feed rail | Pushes and pulls wire between bends |
| Clamp block | Holds the straight section during rotation |
| Cut-off blade | Separates the finished part |
| Pneumatic actuators | Drive clamp and guide movements |
FAQ
What wire materials can this 3D bending machine run? The video shows stiff stainless steel and plain iron wire; the same machine class covers common steel, stainless and coated wires within its diameter range.
Can it make parts with bends in different planes? Yes - that is the point of the 3D design: the rotary head indexes around the wire axis, so clips and hooks with multi-plane geometry are formed in one clamping.
Is changing to a different part expensive? No. The die disc, pins and clamp blocks are bolt-on tooling, so a new wire part mainly needs a new program on the CNC pendant plus matching die pins.