2D Wire Bending Machine for Wavy Ring Parts
Watch a CNC 2D wire bending machine form wavy flower-ring parts from steel wire on a rotary disc table - flat wire forming in one automatic cycle.
Key Specifications
- Materials
- Carbon steel wire
Key Features
- Forms a full wavy ring from straight wire in one cycle
- Rotary disc table pins the wire into even waves step by step
- CNC keypad control stores bend data for repeat runs
- Wave pitch and ring size adjusted through the program
How Are Flat Wavy Wire Rings Bent in One Automatic Cycle?
Short answer: On a CNC 2D wire bending machine. This video shows straight steel wire fed onto a rotary disc table where forming cams pin it wave by wave into a complete flower-shaped ring - the whole pattern is produced in one automatic run, part after part.
What the Video Demonstrates
| Stage | Equipment | Result |
|---|---|---|
| Feed | Straight feed through guide rollers | Wire reaches the disc at the right length |
| Form | Rotary disc table with forming cams | Even waves pinned around the ring |
| Control | CNC keypad with program data | Same bend values every cycle |
| Output | Finished ring lifted off the disc | Identical wavy parts per batch |
Key Applications
- Decorative wire rings, clips and retainers
- Wavy gasket-style spring forms
- Hardware parts replacing slow manual jig forming
- Small-batch production with frequent pattern changes
CNC 2D Bending vs Manual Ring Forming
| Criterion | Manual forming | CNC 2D wire bending |
|---|---|---|
| Wave repeatability | Varies by operator | Program-controlled |
| Pattern change | New jig needed | Load another program |
| Cycle | Re-clamp for each wave | One automatic run |
| Part flatness | Tool marks common | Clean disc forming |
FAQ
What parts can this 2D wire bending machine produce? Flat wire shapes such as wavy rings, flower rings, clips and retainers; tooling is matched to your part on request.
Can the wave pattern and ring size be changed? Yes. Bend values are edited on the CNC keypad, so a new pattern runs after loading its program.
Which wire materials work on this machine? Carbon steel wire and similar spring-steel grades; wire diameter and cam tooling are selected to suit the material.