10mm Round Steel Rod 3D Bending Machine | Coil Feed
Watch a 3D wire bending machine form zigzag parts from 10mm round steel rod fed straight from coil - heavy-duty bending with clean, repeatable angles.
Key Specifications
- Materials
- 10mm round steel rod from coil
Key Features
- Bends thick 10mm round steel rod without pre-cut blanks
- Feeds directly from coil stock and straightens automatically
- Rotary 3D head produces multi-bend zigzag geometry in one pass
- CNC program keeps every bend angle repeatable
How Are Zigzag Parts Bent from 10mm Round Steel Coil?
Short answer: On a 3D rod bending machine with coil feed. This video shows 10mm round steel rod being paid off, straightened and fed directly into a rotary 3D forming head that cuts the zigzag geometry in one automatic cycle - the end shot shows stacks of identical bent parts.
What the Video Demonstrates
| Stage | Equipment | Result |
|---|---|---|
| Feed | Coil payoff and straightener | Clean rod delivered to the head |
| Clamp | Servo grip and clamp unit | Positive hold during heavy bends |
| Form | Rotary 3D bending head | Sharp zigzag angles in one pass |
| Output | Auto cut-and-release | Uniform parts stacked in batches |
Key Applications
- Rebar-style zigzag frames and connectors
- Furniture, rack and guard frames in thick rod
- Construction and hardware parts from coil stock
- High-volume shops replacing cut-and-press methods
Coil-Fed 3D Bending vs. Pre-Cut Blanks
| Criterion | Pre-cut blank bending | Coil-fed 3D bending |
|---|---|---|
| Material handling | Manual cutting first | Straighten and feed automatically |
| Cycle setup | Load each blank | Continuous part after part |
| Bend accuracy | Fixture dependent | CNC servo controlled |
| Batch consistency | Variable | Uniform stacks of parts |
FAQ
Can this machine really bend solid 10mm round steel? Yes - the video demonstrates 10mm round steel rod formed into multi-bend zigzag parts; the head and clamp are built for heavy rod loads.
Does the rod have to be cut before bending? No. Coil stock is paid off, straightened and fed directly, so each part is formed and cut in the same automatic cycle.
Are the finished parts interchangeable across a batch? Yes. Feed length and bend angles are CNC-controlled, producing identical zigzag parts batch after batch as shown in the end stack.