11mm Stainless Rod Handle Bending Machine | True 90 Bends
An 11 mm stainless round rod handle bending machine forms crank pulls with true 90-degree corners, scratch-free surfaces and standard center distances.
Key Specifications
- Materials
- 11 mm solid stainless steel round rod
Key Features
- Bends 11 mm stainless round rod into crank handles
- Wrap-around die leaves the stainless surface scratch-free
- True 90-degree corners verified with a try square
- Standard center distance checked with a caliper
How Are 11 mm Stainless Rod Handles Bent to True 90-Degree Corners?
Short answer: On a hydraulic rotary wrap-around die. This video shows an 11 mm stainless round rod handle bending machine producing crank pulls whose corners are checked square with a try square, whose center distances are verified with a caliper, and whose polished surfaces come off with no scratches or die marks.
What the Video Demonstrates
| Stage | Equipment | Result |
|---|---|---|
| Verify stock | Digital caliper on the rod | 11 mm stainless confirmed |
| Bend | Hydraulic rotary wrap-around die | Clean 90-degree corners |
| Check angle | Try square on the finished part | Legs flat and square |
| Check spacing | Caliper across the tabs | Standard center distance every part |
Key Applications
- Stainless door, gate and enclosure pull handles
- Crank handles for cabinets and machinery
- Hardware shops replacing hand bending with a powered station
- Batch production needing verified geometry
Rotary Bending vs. Press Bending for Stainless Rod
| Criterion | Press bending | Rotary wrap-around bending |
|---|---|---|
| Surface marks | Common on polished rod | None |
| Corner accuracy | Springback varies | True 90 degrees, checked square |
| Cycle time | Slower, multi-hit | One quick hydraulic stroke |
| Part consistency | Operator dependent | Caliper-verified repeatability |
FAQ
What rod sizes can this handle bending machine process? The video demonstrates 11 mm solid stainless round rod; dies are matched to other diameters and to aluminum or brass on request.
How is handle geometry verified? As shown: a try square confirms 90-degree corners and a caliper confirms the center distance, so every handle fits standard mounting patterns.
Does the machine mark the stainless surface? No - the rod wraps around the die instead of being squeezed, keeping the polished surface free of scratches.