10mm Stainless U-Handle Bending Machine | Mark-Free Bends
A benchtop rotary bender forms 10 mm stainless steel U-handles with clean, mark-free bends - straight rods in, identical polished pulls out in seconds.
Key Specifications
- Materials
- 10 mm stainless steel round rod
Key Features
- Bends 10 mm stainless rod into U-handles in seconds
- Wrap-around die keeps the polished surface mark-free
- Red clamp block holds the rod without denting
- Straight rods staged in rows for fast cycling
How Are 10 mm Stainless U-Handles Bent Without Surface Marks?
Short answer: By wrapping the rod around a rotary die instead of pressing it. This video shows 10 mm stainless steel round rod being formed into polished U-handles on a benchtop bender: the clamp block holds the bar, the bend pin sweeps each corner, and the finished pulls come off mark-free with both legs identical.
What the Video Demonstrates
| Stage | Equipment | Result |
|---|---|---|
| Stage | Rod blanks lined up in rows | Fast, uninterrupted cycling |
| Clamp | Red bolt-on clamp block | Rod held firm without dents |
| Sweep | Rotary wrap-around bend pin | Clean 90-degree corners |
| Repeat | Second leg formed the same way | Identical U-handles all batch |
Key Applications
- Stainless U-pull handles for doors and cabinets
- Grip handles for equipment and enclosures
- High-volume small hardware production
- Bright-finish parts that must stay scratch-free
Rotary Wrap-Around vs. Press Bending for Stainless
| Criterion | Press bending | Rotary wrap-around bending |
|---|---|---|
| Polished surface | Marks and scoring | No marks |
| Corner radius | Varies with wear | Set by die pin |
| Cycle | Re-clamp per leg | Sweep both legs in one setup |
| Batch consistency | Operator dependent | Identical handles |
FAQ
What rod size is demonstrated here? 10 mm solid stainless round rod; the same station is tooled for other diameters and for aluminum or brass.
Does the clamp leave witness marks on bright stainless? No - the clamp block contacts the straight leg away from the visible bend zone, and the wrap-around action keeps the finished surface clean.
How fast is one handle? Both corners are swept in a single placement - with blanks staged in rows as shown, an operator produces finished handles every few seconds.